2007 - 2018 Sprinter Heavy Duty Front Passenger Seat Swivel Adapter - in stock

Purchased for a 2016 High Roof 144 WB. The holes for attaching to the base did not align properly. Had to use a Dremel like tool with an abrasive cone to enlarge 2 of the holes (~3 hrs work). Added some Rust-Oleum and finally could install. Moving the seat-belt attachment was easy, but not well mentioned in all instructional videos. After several days, the height gained on the seat is not obvious. Seat operation is easy, no need to open door, just move seat forward a bit. REPLY FROM EUROCAMPERS: If you follow the included instructions they mention to loosen the bolts that hold the seat base to the floor of the van. This will allow the seat base to easily flex and align with the holes in the swivel adapter. The seat base in the Sprinter is out of square and this procedure will match everything up. Old tooling at Mercedes? Sloppy work at the Mercedes Factory? It's not our swivels.

The product came as described and was very easy to install. WHole project took 20 minutes. The only downfall was the instructions are not in English but its pretty simple to figure it out. (note from EuroCampers.com: We include English instructions with our Sprinter swivels. There is an information packet in with the swivel that is printed in German, but we do include illustrated instructions in English.)

Fast shipping. 2018 Sprinter. Very straight forward install. The fit was spot on. No modification needed. Directions were easy to follow, plus a ton of youtube videos for other reference. I would recommend connecting the seat belt on early in the install. Also don't forget to put your seat belt connection bolt back into your seat once you switch the belt to the swivel. Heavy duty swivel.

Exactly what i needed. took about 20 min to install and fit was spot on.

The base is made of thick plates and looks very solid. No rocking of the seat while driving. Installation was fairly easy. Only drawback is the unlocking mechanism. You have to slide the seat back/forth to unlock the rotation mechanism.

We are thrilled with them. They make the interior so much roomier and they are still comfortable!

Bought a set of these for my Sprinter Van. A bit tricky to swivel in - trying to avoid the door and the steering wheel, but it is a solid swivel and holds the chair well. Note that it does raise the seat up a bit - as disclosed by the mfr. Be sure to loosen all of the base bolts to make the bit of the metal screws easier.

This swivel seat adapter is awesome. Very easy to install. Took about 20 minutes and it was ready to go. Mainly, thanks to the supplementary instructions included along with the German instructions. Seat is comfortable and swivels really easy. Does cause seat to sit a little higher but that was expected.

This swivel seat was simple to install and works great! We like how it helps create more seating in our "living room" part of the van!

Used on 2007, 170 wheelbase. Works perfectly!!! Great investment. Intuitive installation.