Sprinter Roof Track System

2007-2025 Sprinter Roof Track System factory style roof rails

8 Review(s) Write a Review

Your Price: $279.49

Retail Price:$450.00

Your Savings:$170.51(38%)

Sprinter Aftermarket Roof Rails

Questions about this item? Ask here.

Part Number: RT1xx_

Availability: In Stock. Ships in 1 to 2 business days.

Delivery: This item qualifies for free shipping!

Choose your Wheelbase *

Quantity

Description
Product Features
Customer Reviews
Questions and Answers

Vantech Sprinter Roof Rails for 2007 and newer models

This is a direct-fit item specifically for Sprinter models that did not come from the factory with this option. Made by Vantech USA. Includes both driver and passenger side rails and allows for installation of our roof rack systems, and other roof-mounted accessories. Great option when compared to the expensive factory OEM roof rails.

The use of automotive-grade silicone sealant around all openings and fasteners is highly recommended. Installation of Fiamma F65S/F80S mounting brackets will require modifications for the brackets and/or the roof tracks. Use of the Mercedes OEM rails is recommended if you plan to install an awning. OEM rails are available at your Mercedes dealer.

customized for each wheelbase Sprinter
Mounts to existing roof mounting points
Includes stainless hardware
Includes foam gaskets, end caps & track connectors
Color: silver with black end caps
Compatible with Vantech T-Bolt Sliders

144" Instructions

170" Instructions

170" XL Instructions

Usually ships within 1-3 business days. Please allow an additional 1-5 business days for delivery to most US locations.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.5

Reviews Sorting

pre drilled holes were not countersunk

This track system was easy enough to install, the holes lined up with the factory holes in van roof fine and is a good quality build. One complaint is that the holes were not countersunk and pan head bolts were provided. I discovered after I installed the rails, that the photos on vantechs website show countersunk holes with flat head bolts. Since it came from the manufacturer without countersunk holes and pan head bolts I assumed that it would not be a problem. I attempted to install a Topper rack and the sliders that came with the rack would not slide down the track because the bolt heads interfered with the sliding bar. This is a huge inconvenience, I have ordered sliders from Eurocampers website to see if they are a lower profile. If they are not I will have to remove the bolts to install the sliders on the track.

Did you find this helpful? 4 of 4 Found Helpful

Reviewed by: Shawn from California on 2/24/2016

Owner

Everything came as described and was well packaged. I had a few issues with mounting on my 2019 144 high-roof. When mounted using just the factory bolts, the rear rail does not fit flush with the rear of the van and is suspended by about 1/4-1/2" when the factory mounting bolts are used. I drilled the additional mounting holes for the "optional" aft bolts and it pulled things into place, but it seemed a bit sketchy to have to pull things into shape like this. The metal clips that are provided for aligning the front and rear rails weren't up to the task and wouldn't hold the rails in alignment. So, I had to drill addition bolt holes near the front of the rear rails where the two rails meet. There's plenty of clearance for these additional holes so it's not a difficult task, but definitely one I'd recommend. I also used some bits of butyl tape around the bolts to ensure a rain seal since I don't trust just the weather strip.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: John from Alaska on 7/21/2020

Great solid product, very happy

Did you find this helpful?

Reviewed by: Troy Schalm from BC on 6/14/2022

Mr.

Arrived as advertised. Holes lined up very well, but the most forward and aft hole on each side of rail pair would have to be drilled. No problem there. This is a one man job due to the fact that the rails are threaded for the button head screws. You tighten the screw in the rail first then install the rail. The only thing I did was deburr the inside of the rail where the screws goes and then install silicone under each head of the screw before tightening to rail. Happy with the results. Make sure that what you order to go on the rails uses that type of rail. ie: Fiamma Awning system

Did you find this helpful?

Reviewed by: Tim Casey from Rochester , MN on 8/19/2016

Roof Rails

We have used these rails on several occasions and have them easy to install. Everything lines up well. Good product

Did you find this helpful?

Reviewed by: Alex Hoelk from Squamish BC on 11/27/2019

sprinter roof rails

They went on pretty easily, plastic knock outs matched perfectly.. time will tell if they are waterproof.

Did you find this helpful?

Reviewed by: Dan from nevada on 5/10/2013

Sprinter owner

The Sprinter roof track system installed easily and with no problems. A well designed system with a low profile. No mess or alignment problems.

Did you find this helpful?

Reviewed by: Doug Mitchell from Nevada City, CA on 5/28/2013

Great product

Pretty straight forward install. Holes line up great with OEM holes. Will need two people to tighten screws. It would be nice if there were tourqe lb.specs. I went out and purchased slightly bigger washers to better distribute the force of the nut. The smaller washers began to bend a bit. Not a big deal I'm sure. Did a water test with garden hose and everything looks good. Saved allot of money doing it myself.

Did you find this helpful?

Reviewed by: VanFam from OC California on 6/6/2015

View all Q&A