Q: Hello, Just wanted to ask if the ScanGuageII supports MB Freight-liner 2016. Any information on plug in location and where to mount.
A: The port is located underneath the fuse panel cover to the left of the steering wheel at the bottom of the dash. You can run the cable behind the dash and mount anywhere you have the space. A suction cup mounting bracket is available or the ScanGauge includes velcro.
Q: Hello, would the OBDII work for a 1993 European 5 Cal, 2.5L gas engine?
A: Only for OBDII systems, 1996 and newer.
Q: I have heard that this will not work on my 1996 Urovan. Your web site says it will work
A: Your 1996 is likely built on a 1995 chassis and you have OBD1 so this product is not compatible.
Q: My understanding was that these units are upgraded with the latest firmware so that they can show transmission temps? Where can I access this information?
A: Would need to know your year, make, model. But if you are asking about the VW EuroVan the trans temps are not programmed in. You need to do a simple program to add this gauge. The procedure is here: https://www.scangauge.com/support/x-gauge-commands/volkswagen/