ProMaster 3 bar aluminum roof rack

2014-2026 ProMaster H3 Style 3 Bar Aluminum Roof Rack

2 Review(s) Write a Review

Your Price: $499.95

Retail Price:$709.00

Your Savings:$209.05(29%)

ProMaster H3 Style 3 Bar Roof Rack w/ End Caps

Questions about this item? Ask here.

Part Number: H3543B

Availability: In Stock. Ships in 1 to 2 business days.

Quantity

Description
Product Features
Customer Reviews
Questions and Answers

Vantech H3 3 Bar Roof Rack System for 2014 - 2026 Ram ProMaster. Fits both High Roof and Low Roof Models.

The H3 low profile system with end caps is a direct bolt-on system. No drilling is required. Clamps to factory mounting points. The crossbars have built-in channels for T-Bolt Sliders to mount additional accessories. Crossbars are designed to minimize wind noise. The mounting bases are aluminum 3mm thickness and 8 inches wide for better support and grip. All mounting brackets and hardware required for installation is included. The rack has a weight capacity of 750 pounds, evenly distributed. Do not exceed the factory roof weight rating.

Black anodized finish.

Cross Bars are 3" x 1.5" x 65" heavy duty reinforced aluminum.

It is one of the lowest systems with a height clearance of 7" total.

All mounting bases are aluminum @ 3mm thickness and 6" wide for better support and grip and vehicle specific to follow the curvature of the roof top.

Usually ships by the next business day. Please allow an additional 1-5 business days for delivery to most US locations.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.5

Reviews Sorting

Great product, wrong bolts, missing nuts & washers

Very nice aluminum bars, and steel uprights seem very sturdy and well coated. Problem is the 1-1/4" bolts for the uprights were only 1" and thus not long enough. Also, there were only 16 washers and 15 nylock nuts out of the 24 of each that are necessary to mount the three racks. The packing list was wrong and the bolt, nut, and washer count didn't even match that! Go figure. Had to go to the better hardware store and spend time and about $15 to make it right. So, in the end, the cost was offset by the trouble, but EuroCamper says they will reimburse for the cost of the replacement nuts and bolts. This is not EuroCamper's fault, as they drop ship from VanTech, the manufacturer, but it still sucks for me, and EC are forced to clean up someone's mess. A solid 5 for the rack and EuroCamper, a solid 2.5 for VanTech's packaging, thus I'll settle at 4 stars. VanTech needs to get their employees to put down the bong for five minutes and pay attention. It reflects badly on their overall business plan, i.e., staying in business. Cheers.

Did you find this helpful? 5 of 5 Found Helpful

Reviewed by: (Verified Buyer) Christopher Nassopoulos from MIll Valley, Ca on 11/11/2015

Perfect fit

EuroCampers gets 5 stars for fast delivery and the racks arriving in good condition, and at a good price. Most important, their good customer support. The racks themselves that come from EurCampers Vantech supplier get 4 stars. The racks fit the ProMaster roof "T" nobs perfect, are easy to install, are very sturdy, and when installed look great. The subtraction of a star comes because the end caps were missing and the screws and nuts were of poor quality and were missing the required numbers. I called EuroCamper about the end caps and had them three days later. I would suggest getting your own stainless steel carriage bolts and nuts. Overall I am very happy with the racks and would recommend them.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Paul from East Moline, Illinois on 4/5/2015

Q: Is this available with 4 bars?

Asked by: Maia Franz - 6/19/2020

A: Yes, there are 2 versions of a H3 4 bar available.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (6/20/2020)

Submit an answer

Q: How much is the weight capacity

Asked by: Julio - 7/26/2020

A: about 200 pounds per crossbar evenly spaced. This will exceed the weight capacity of your roof. Check your owner's manual.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (8/3/2020)

Submit an answer

Q: do you ship to Canada and will i pay duty?

Asked by: Serge Thibodeau - 7/30/2020

A: Yes, we ship to Canada, this option is available on our website. Duty tax and brokerage is due upon delivery,

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (8/3/2020)

Submit an answer

Q: I have an awning on my 2019Hymer Aktiv 2017Promaster, it’s a Carefree Freedom. It mounts to factory roof mounts. Can I add your roof rack with some sort of adapter so roof mounts can hold both rack and awning? I don’t plan to put much weight over your 3 bar system but the awning adds 60# to the 4 passenger side factory roof mounts. Thanks Kind Regards

Asked by: Bob - 11/16/2020

A: We have brackets available for the Fiamma F45S that can be used to mount to this rack. For your Carefree awning, you would need to check with this manufacture to see if they offer any rack mount brackets.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (11/23/2020)

Submit an answer

Questions about this item? Ask here.

S053 Set of 2 Double Sliders, 5/16" Thread, 3/4" Long Bolt, 3" b-b for roof tracks & crossbars

$17.50

(2)

Buy

Set of 2 Vantech S054 Double Sliders

$17.50

Buy

ProMaster No Drill Rear Ladder Black or Silver

$689.30

(15)

Select Options

2014-2026 ProMaster H3 Style 3 Bar Aluminum Roof Rack

Rating Snapshot

Average Customer Ratings

Q: Is this available with 4 bars?

Q: How much is the weight capacity

Q: do you ship to Canada and will i pay duty?

You May Also Like

Browse Similar Items

Mailing List