ProMaster 118" and 136" WB H2.1 Modular Style Aluminum Roof Rack
From Work Vans to Camper Vans, EuroCampers is your source for everything van related
RAM ProMaster Low Roof H2.1 Style Aluminum Roof Rack for 118
RAM ProMaster Low Roof H2.1 Style Aluminum Roof Rack for 118' and 136' wheelbase

RAM ProMaster Low Roof H2.1 Style Aluminum Roof Rack for 118" and 136" wheelbase

Write a Review
Your Price: $1,359.20
Retail Price:$2,049.00
Your Savings:$689.80(34%)
RAM ProMaster Low Roof 118" and 136" H2.1 Style Aluminum Roof Rack
Part Number: H3501x_
Availability: In Stock. Ships in 1 to 2 business days.
Delivery: This item qualifies for free shipping!

Choose Product Options

*
*
Vantech H2.1 modular system can be customized for your specific use.  More crossbar mounting holes at shorter intervals allow you to build the rack around roof vents, skylights and A/C units.  You decide where and how many crossbars to use. This will allow you to compensate for solar panels, roof vents, and much, much more! Options for front and rear end accessories will allow you to tailor our system to your individual needs.

Fits RAM ProMaster Low Roof 118" and 136" Wheelbase models

Vantech H2.1 is rated for up to 750lbs.  Check your owner's manual for roof weight rating of your vehicle.  Do not exceed the manufacturer's weight limit.


Choose one of 4 configurations

Design improvements have allowed us to increase usability and ease of install, while reducing the overall weight of the system by 20%. This was done by focusing more material in the most crucial weight-bearing points and joints of the system, while reducing the material in areas that hold no structural significance. Modularity has also been increased with the addition of more crossbar mounting holes at shorter intervals across the side rails - meaning you can better pick and choose where your crossbars will go, and how many you may need. This will allow users to compensate for various sizes of solar panels, roof vents, roof decks, and much more! We have also designed a series of front and rear attachments that allow you to tailor our system to fit your individual needs. We have also widened the side-rail accessory slots to better accommodate third-party gear such as awnings and water tanks. Finally, the stronger design allows the whole system to be mounted lower and closer to the roof line, with our new low-profile mounting bases. Your rack and cargo will now be more secure and face less drag and wind noise.

Choose one of 4 configurations:
AA
The AA configuration is simple and clean. Two “loop” or ‘U’ style end caps on each end of the system closes off the holes of the side rails, and leaves an open ended rack for cargo such as ladders, canoes, and surfboards.
Vantech H2.1 AA
AA System RAM ProMaster 118" WB DIM1 110" DIM2 65" DIM3 122" DIM4 8" / 136" WB DIM1 126" DIM2 65" DIM3 138" DIM4 8"  750 lbs

DC
The DC configuration utilizes a 40 degree angled faceplate for both the front and rear end. The angled front faceplate acts as a wind foil, and reduces drag as well as wind noise when traveling. It also channels air over and around any low profile cargo like ladders and folding tents. The rear angled faceplate reduces drag and wind noise by allowing air to pass over and around it in a smoother fashion. It should be noted that both the front and rear end can be installed upside down in order to turn the entire system into a large roof basket.
Vantech H2.1 DD option
DC System RAM ProMaster 118" WB DIM1 110" DIM2 65" DIM3 122" DIM4 8" / 136" WB DIM1 126" DIM2 65" DIM3 138" DIM4 8" 750 lbs

EBThe EB configuration is ideal for hauling larger and longer cargo. The ‘E’ front end acts as an extension to the overall system by adding an extra cross bar up front. This crossbar adds an extra 19.5 inches of space to the H2.1 system, and allows for fog lights and other clamp-mounted accessories to be seamlessly integrated to the system.The ‘B’ roller on the rear allows for easy loading and unloading. It also protects your roof line and any high mounted brake lights or reflectors from accidental loading/unloading damage.
Vantech H2.1 EB option
EB System RAM ProMaster 118" WB DIM1 110" DIM2 65" DIM3 136-142" DIM4 8" / 136" WB DIM1 126" DIM2 65" DIM3 152-158" DIM4 8" 750 lbs.

ECThe EC configuration turns your H2.1 into an extended half basket. The ‘E’ front end acts as an extension to the overall system by adding an extra cross bar up front. This crossbar adds an extra 19.5 inches of space to the H2.1 system, and allows for fog lights and other clamp-mounted accessories to be seamlessly integrated to the system. The ‘C’ rear faceplate closes off the rear and prevents cargo from falling or sliding out from the back of the system.
Vantech H2.1 EC option
EC System RAM ProMaster 118" WB DIM1 110" DIM2 65" DIM3 136" DIM4 8" /  136" WB DIM1 126" DIM2 65" DIM3 152" DIM4 8" 750 lbs.



Design improvements have allowed us to increase usability and ease of install, while reducing the overall weight of the system by 20%. This was done by focusing more material in the most crucial weight-bearing points and joints of the system, while reducing the material in areas that hold no structural significance. Modularity has also been increased with the addition of more crossbar mounting holes at shorter intervals across the side rails - meaning you can better pick and choose where your crossbars will go, and how many you may need. This will allow users to compensate for various sizes of solar panels, roof vents, roof decks, and much more! We have also designed a series of front and rear attachments that allow you to tailor our system to fit your individual needs. We have also widened the side-rail accessory slots to better accommodate third-party gear such as awnings and water tanks. Finally, the stronger design allows the whole system to be mounted lower and closer to the roof line, with our new low-profile mounting bases. Your rack and cargo will now be more secure and face less drag and wind noise.


TOP
0 Items