Fiamma F45S Awnings for ProMaster Class C & Roof Racks
Fiamma F45S awnings are the correct side-mount solution for ProMasters with roof racks, low roof ProMasters when paired with a roof rack, Super High Roof ProMasters, and Class C RVs built on a ProMaster chassis.
Use this page to choose the correct F45S awning and brackets for your ProMaster application and then order below.
Which ProMaster Applications Use the F45S?
| ProMaster / RV Configuration | Mount Location | Bracket / Hardware |
|---|---|---|
| ProMaster with roof rack | Side of a roof rack | Custom install. See our awning roof rack guide for more info. |
| Low Roof ProMaster | Side of a roof rack | Custom install. See our awning roof rack guide for more info. |
| Super High Roof ProMaster | Above the sliding door | Standard F45S wall-mount bracket kit (included). Drilling into the body is required. |
| ProMaster chassis Class C RV | Side wall of the RV coach | Standard F45S wall-mount bracket kit (included). Drilling into the RV wall is required. |
If your ProMaster is a standard high roof van using factory roof mounting points, see our F80S or F65 Eagle options instead.
F45S Length & Bracket Position GuideFiamma F45S awnings for ProMaster models extend approximately 8'2" when opened. For these installs, key measurements are overall case length (A) and bracket spacing (B).
For roof rack-mounted ProMaster installs, bracket placement is just as important as cassette length. Even if the awning case appears to fit, the awning may not mount correctly if the bracket locations land where there is no support due to the location of the specific factory roof mounting points. Choosing a roof rack with side rails can make this easier to plan. |
Diagram illustrates overall case length (A), bracket spacing (B), and awning extension (C).
For ProMaster applications, the most important considerations are the total cassette length and where the brackets need to land.
|
