Great fit if your awning is sitting on the brackets and they are tight against vehicle without spacers used. However, I had my brackets a little too high, so when I mounted the awning, the top of the awning was just about touching the roof trim at each end. When installing the rain guard seal, it just barely got in due to lack of room at ends touching roof trim, but that was my mistake for not leaving enough room for the seal. Otherwise, it fit in perfect. Do not attempt to slide the seal in from one end. Instead, start at on end carefully using a flat blade screwdriver to push into place. Cut off excess at each end with exacto knife for a professional look. I highly recommend this seal if using original flat brackets that come with Fiamma awning. If using modified brackets, then this seal may not work, only for flush mount brackets.
Reviewed by: Michael D Presler from NY on 10/3/2021