Shipping note: Because this is a lithium-ion battery, it ships by ground service only (no Express or air shipping) and can be delivered to the 48 contiguous US states only. We’re unable to ship it to Alaska, Hawaii, or US territories.
The Einhell 18V Power X-Change 4.0 Ah Battery is the genuine lithium-ion battery that powers your Clesana X1, sold on its own, without a charger. It’s the right pick if you already own an Einhell charger, run the X1 ProCharge (which charges the battery for you), or simply want a spare battery so you’re never caught empty on the road. One 4.0 Ah battery delivers roughly 40–50 sealing cycles per charge.
Battery only. No charger included. If you’re starting from scratch and don’t already own an Einhell charger, choose the 4.0 Ah Starter Kit instead. It bundles this same battery with a charger.
Your toilet recharges the battery itself from 12V, 24V, or mains, so you just need the battery, not another charger.
If you have any Einhell Power X-Change charger from another tool, this battery drops right in, with no need to buy another.
Keep a second charged battery on hand for longer trips or as backup. Swap in seconds and keep going.
The Clesana X1 and X1 ProCharge run on Einhell’s 18V Power X-Change platform, the same battery system used across hundreds of Einhell tools. Slide a charged battery in and you’re ready; there is no adapter needed. Any 18V PXC battery you already own works in the X1 too.
A fully charged 4.0 Ah battery delivers approximately 40–50 sealing cycles, comfortable for a weekend getaway or a couple on a week-long trip. Carrying a spare effectively doubles your off-grid range between charges.
Power X-Change is a fully interchangeable 18V battery system. The same battery that runs your X1 also powers Einhell’s cordless tools, so nothing goes to waste between trips.
A microprocessor continuously monitors the cells for safety, longer run time, and a longer service life.
Check the remaining charge at a glance before you head out, with no surprises on the road.
Rubber-coated and built to resist dust, corrosion, and impacts, so it's at home in a van or cabin.
Top it up any time. Lithium-ion cells resist the memory effect and hold charge well between trips.
No, this is the battery only. If you need a charger too, choose the 4.0 Ah Starter Kit, which bundles this battery with a charger, or the Twin Kit with two batteries and a dual-port charger.
Yes. This is a standard 18V Power X-Change battery and works with any Einhell PXC charger, as well as any 18V PXC tool you own.
A 4.0 Ah battery delivers approximately 40–50 sealing cycles per charge, enough for a weekend or a week-long trip for most users. A spare battery is a smart add for longer stays.
Yes. The X1 ProCharge recharges the battery itself while powered from a 12V, 24V, or mains source, so you don’t need a separate charger, just at least one battery, which this is.
Yes. We stock and sell only genuine Einhell Power X-Change batteries, shipped from our warehouse near St. Louis, Missouri, with US-based support behind them.
These batteries are coming soon. To be notified the moment they’re in stock, join the waitlist at the top of the page, reach out to our team at [email protected] or call 636-337-7700.
Because this is a lithium-ion battery, it ships by ground service only (no Express or air options) and can be delivered within the 48 contiguous US states only. We’re unable to ship it to Alaska, Hawaii, or US territories.
We’ve been outfitting US van builders and campers with European accessories since 1997. We’re family-owned and operated near St. Louis, Missouri, and we carry the full Clesana X1 line alongside the genuine Einhell Power X-Change batteries that power it, so you’re buying the real product with US-based support behind it. Questions about your order? Reach us Monday–Friday, 9 AM–5 PM Central at 636-337-7700 or [email protected].
These batteries ship by ground service to the 48 contiguous US states only. Reach us Monday-Friday, 9 AM-5 PM Central at 636-337-7700 or [email protected].
